The RFP Architect · I Know A Girl Enterprise

Start here.
Module 01.

You have just been set up in the portal. There is one module to fill in before anything else runs, and this page walks it end to end. Nothing is assumed.

ikagportal.netlify.app Property Setup & Profile Allow about an hour
Three things before you begin
  1. Everything you type saves by itself. There is no way to lose your work by closing a screen.
  2. Nothing you enter gets overwritten. The portal fills blanks from your reports and lookups, but anything you typed by hand stays, and it asks before replacing something.
  3. The Ask IKAG button reaches a person. It is in the bottom right of every screen. A question asked today costs nothing. A guessed number costs the account.
Why this module first

Locked once. Used everywhere.

Every other module reads from Module 01. Your rates, your agency work, your demand brief, your forecast: all of it is built on what you enter here. Get it right once and the rest of the architecture writes itself. Leave it half done and everything after it is working from thin air.

The AI builders stay locked until this module is complete, you submit it, and IKAG approves. That approval is the gate.

Read this before you pull a single report

Two rules that decide whether any of it counts.

Rule one: every report ends on the same date

Agency360, Demand360 and all PMS production must end on the same date, the one Module 01 names at the top of the reports section. If the end dates do not match, the year over year comparisons are invalid and the analysis cannot be built.

The one exception is the full year 2025 report, which runs 1 January to 31 December 2025 because it is a closed calendar year.

Rule two: production by account, not by rate plan

Your PMS production has to be broken out by company or account. A rate plan report shows which rates were sold, not who bought them, so your corporate accounts cannot be identified from it. If your PMS defaults to a rate plan view, change it before you export.

The module, step by step

Seven steps, in order.

Open the portal, sign in with the address IKAG granted access to, and click the Module 01 card. A card is a button. Check the top bar says your hotel before you type anything.

1

Let the portal fill in what it can

Paste your hotel website address into the Start here box and press Start here: let AI fill the blanks. It fills brand, room count, city, state and asset class.

It only fills boxes that are empty, so anything you typed is left alone. Read what it filled before you move on, because a website is not always current. The segment baseline is never filled this way. That comes from your PMS and Demand360.

Start here
Start here: paste your hotel website URL
✦ Start here: let AI fill the blanks
2

Finish the property boxes by hand

Property name, brand, room count split into standard, upgrade and suites, street address, city, state, and asset class. Asset class is a dropdown: select service, full service, resort, lifestyle or boutique, extended stay, independent.

Property name
Your Property
Brand
Your Brand
Room count
Standard
Upgrade
Suites
3

Open the contact cards. All of them.

This is the single most common miss in the whole portal, so read it twice.

Under Contact data you enter the owner and the management company. Below that sits a stack of cards, one for each role: asset manager, general manager, director of sales, director of revenue, and so on. Each card shows a name box, a title, and a small plus at the right hand end.

The email and cell boxes are behind that plus. The card looks finished when it is not. Press the plus on every card, or press Open all contact cards once and they all drop open together.

Contact data Open all contact cards
Enter name Asset Manager +
Enter email
Enter cell
Enter name General Manager +
▸ The plus opens the email and cell boxes
Why it matters

These contacts receive every notification, every deliverable and every review call invitation. A property with empty cards misses all of it, and then tells us the portal went quiet.

4

Build the comp set

Press Add property and type each competitor one at a time. If you already have the list somewhere, press Paste a list and drop them all in at once. The small cross beside a property removes it.

5

Enter the segment baseline, and make it total 100

This section wants the contribution percentage of room nights for the trailing twelve months, in two columns: your hotel, and your comp set, matched to the Demand360 segmentation.

Fill it by hand, or press Upload segment report and let the portal read your Demand360 Segment or Channel summary and fill it in by segment. Review what it filled, then save.

Segment baseline · trailing 12 months · Demand360
Segment
Transient
Hotel RN %
Totals to 100%
Comp set RN %
Totals to 100%
▸ Same rule for Group Sold and Other
This one blocks saving

The three top level rows, Transient, Group Sold and Other, must each total 100 percent in both columns before the module will save. If saving is refused, this is almost always why.

The sub segments underneath are detail and roll up into their parent, so they are not what has to total 100. Use the carets to open and close them.

6

Upload the fifteen required reports

Every slot has its own Instructions button telling you exactly where to pull that report from, and there is a Download all instructions PDF at the top if you would rather print the lot.

File names do not have to match anything. The portal reads what is inside the file, not what it is called. Files up to 25 MB. The counter at the top of the section shows how many are validated, present but not yet validated, carrying a Why-Not, and still missing.

ReportWhere it comes from
OverviewAgency360 → Overview
Performance Trends, Month ViewAgency360 → Performance Trends
Booking PatternsAgency360 → Booking Patterns
Agency Targeting, Rank By OpportunityAgency360 → Agency Targeting
Agency Targeting, Rank By CS RevenueAgency360 → Agency Targeting
Agency Targeting, Rank By Market RevenueAgency360 → Agency Targeting
Agency Targeting, Rank By Subscriber RevenueAgency360 → Agency Targeting
Corporate Performance, Subscriber RevenueAgency360 → Corporate Performance
Corporate Performance, Comp Set RevenueAgency360 → Corporate Performance
Corporate Performance, Market RevenueAgency360 → Corporate Performance
Trailing 12 Months ProductionYour PMS
Year-to-Date ProductionYour PMS
Full-Year 2025 ProductionYour PMS
Comp Set Rate ShopShop tool or manual
Manual Grunt WorkCompiled by property
Prior-Year Roadmap or Pricing Workbook optionalLast year's deliverable
If a report does not exist for your property

Do not leave the slot empty and do not upload something else instead. Press Record a Why-Not reason on that slot and tell us why. A recorded Why-Not counts as handled and lets you move on. An empty slot holds up the whole approval.

The one that takes real time

Manual Grunt Work is the heaviest lift and the highest value input: account level detail for every top and target account, the top producing hotel with room nights, ADR and revenue, plus day of week and length of stay production. It is what lets the analysis name accounts to defend and accounts to chase with numbers behind them. Start it early.

7

Save, then submit for approval

Press Save property profile. Your typing has been saving as you went, but this is the press that closes the module out.

Then submit for approval. IKAG reviews what you have entered and unlocks the rest of the architecture.

After you submit

What happens next.

Before you call us

Questions we get every cycle.

It will not let me save.
Check the segment baseline. Transient, Group Sold and Other must each total 100 percent in both the hotel column and the comp set column. The sub segments underneath roll up and are not what has to total 100.
I typed a name into a contact but IKAG says it is empty.
The email and cell boxes are hidden behind the small plus at the end of each contact card. A card with a name and no email still counts as incomplete. Press Open all contact cards and finish each one.
Do all my reports really have to cover the same dates?
Yes, and this is the one that quietly invalidates everything. Every report must end on the same date, the one Module 01 names at the top of the reports section. The only exception is the full year 2025 report, which runs the closed calendar year.
My PMS report is by rate plan. Is that alright?
No. Production has to be broken out by company or account. A rate plan report shows which rates were sold, not who bought them, so your corporate accounts cannot be identified from it.
I cannot get one of the fifteen reports.
Press Record a Why-Not reason on that slot and say why. That counts as handled and lets you move on. Do not leave it blank and do not substitute a different report.
Does the file name have to match?
No. The portal reads the data inside the file, not the file name. Files up to 25 MB.
Do I have to press save, or does it save by itself?
Both are true and neither will lose your work. Fields save as you type. Save property profile closes the section out and updates the counters.
Will the AI overwrite what I typed?
No. Lookups and report reads fill blanks only. Anything you entered by hand stays, and the portal asks before it replaces something you typed.
Nothing will run. The AI buttons do nothing.
That is expected until Module 01 is complete, submitted, and approved by IKAG. The approval is the gate that unlocks the builders.
I am still stuck.
Press Ask IKAG in the bottom right of any screen in the portal. It reaches a person. Say which module you are on and what you were trying to do.